Model | G-P6 | G-P12 |
Area Of The Printing Table | 320×450mm | 1200×320mm |
Frame Size | 370×470mm、420×520mm、550×650mm | 1500×400mm |
Substrate Size | 300×430mm | 1200×300mm |
Substrate Size | 0.2-2.2mm | |
Fixed Printing Position | Pcb Outer Or Pin Positioning | |
Table Plate Fine Tuning | Front/Back±10mm R/L±10mm | |
Printing Accuracy | ±0.02mm | |
Machine Repeatability | ±0.05mm | |
Minimum Spacing | 0.35mm | |
Use Air Pressure | 4-6kg/Cm2 | |
Using Electric | Single Phase 220v 50/60hz 100w | |
Machine Size | (L)1050×(W)700×(H)1650mm | (L)1600×(W)900×(H)1680mm |
Machine Weight | 250kg | 300Kg |
Model | G-606 |
Number of placement heads | 6 |
Identification method | Flight photo recognition system |
Chip recognition | Flight photo recognition system |
camera | Flight camera + MARK recognition camera |
Maximum circuit board area | 330 * 250mm |
Maximum moving range of Z axis | 15mm |
Maximum placement speed | 12000CPH |
Average placement speed | 10000CPH |
PCB transfer method | Automatic transfer board |
positioning accuracy | 0.01mm |
Nozzle buffer range | 4mm |
Motion drive system | Highly DSP digital high voltage drive |
Use motor | Panasonic servo system |
Board transfer method | Imported ball grinding screw |
power supply | 220v, 50Hz |
Compressed air | 0.5-0.6Mpa |
Average power | About 1000w |
Support the number of feeders | 52 (8mm standard feeder), support 12mm, 16mm, 24mm, etc., support vibration feeder feeder, IC tray, etc. |
Scope of application | Professional placement of resistance components such as 0402, 0603, 0805, diode transistors, SOT, TSOP, SOP, PLCC, CSP, QFP, BGA, etc. with 0.3mm pin spacing |
Component angle | 0-360 ° arbitrary rotation |
Action method | Add and subtract curve control |
operating system | WindowsXP win7 operating system |
Visual display | Industrial control display |
Programming method | Pick place file import, Protel file import,Coordinate import, point to point |
software | GUS 2018 new version upgrade software |
product weight | About 450kg |
Product Size | 1100 * 1000 * 1450mm |
Model | G-R535 | G-R636 |
Heating zone | Upper 5 Zones | Upper 6 Zones |
Bottom 5 Zones | Bottom 6 Zones | |
Heating Mode | Full Hot Air Small Cycle | |
Heating Zone | 1750mm | 1800mm |
Number Of Cooling Zones | 1 | |
Cooling Method | Natural Cold Wind | |
Length of cooling system | 843mm | |
Inner Furnace Material | The Surface Of The Outer Casing Is Painted At A High Temperature, And The Furnace Is Made Of Stainless Steel. | |
Field Of Application | Lead-Free Soldering | |
PCB Max Width | 300mm/ Mesh Belt 300mm | |
Transport Rail Widening Range | 50-300mm | |
Transportation Direction | From Left To Right | |
Transport Rail Fixing Method | Front End Or Back End | |
Transport Height | Mesh Belt 880±20mm, Chain 920±20mm | |
Type Of Shipping | Chain Drive + Mesh Belt Drive | |
Transportation Speed | 0-2000mm/Min | |
Chain Lubrication Device | Automated Lubrication Device | |
Power Supply | 5-Wire 3-Phase 380V 50/60HZ | |
Starting Power | 12KW | 14KW |
Normal Loss Power | 8KW | 10KW |
Heating Time | About 20 Minutes | |
Temperature Range | Room Temperature -400° | |
Temperature Control Mod | Temperature control module PID closed-loop control, SSR drive | |
Temp Accuracy | ±1 | |
Temperature Uniformity | ±2 | |
Abnormal Alarm | Abnormal Temperature (High Or Low After Constant Temperature) | |
Open The Cover | Cylinder Or Electric Screw | |
Backup Power Supply | 1KVA.12AH | |
Equipment Control | Computer + Plc Intelligent Software Control | |
Operating Platform | WindowsXP Professional | |
Temperature curve system | 3ch Line System, Can Only Analyze Software With Temperature Change Rate Display | |
Weight | 360KG | 450KG |
Machine Size | L3000*W662*H1220mm | L3600*W662*H1220mm |
FAQ:
1. who are we?
We are based in Guangdong, China, start from 2019,sell to South America(25.00%),Domestic Market(25.00%),North America(10.00%),Northern Europe(10.00%),Southeast Asia(10.00%),Mid East(10.00%),South Asia(2.00%),Central America(2.00%),Oceania(1.00%),Eastern Asia(1.00%),Southern Europe(1.00%),Africa(1.00%),Eastern Europe(1.00%),Western Europe(1.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
SMT production line,Reflow soldering machine,Wave soldering machine,Solder paste printing machine,SMT peripheral equipment
4. why should you buy from us not from other suppliers?
Over the past 20 years, we have been focusing on SMT production line matching, integrating independent research and development, manufacturing, installation training, and after-sales service. We are a global SMT solution supplier.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese